Motorola 01-W3324F 6U Single-Slot VME Single Board Computer
- Product Code: 01-W3324F
- Availability: In Stock
Purchase Attributes：Original, Brand New
Service Attributes
▷ Stock & Logistics：Fast Delivery
▷ After-sales Guarantee：12 Months Warranty
Operating Temperature: Standard industrial grade 0℃ ~ +55℃ forced air cooling; storage -40℃ ~ +85℃
Firmware Storage: Surface-mount flash memory for boot monitor and VxWorks BSP firmware, optional on-board compact flash socket
Motorola 01-W3324F 6U Single-Slot VME Single Board Computer (OEM Main CPU Card, Compatible with Honeywell TDC3000)
Manufacturer: Motorola Computer Group, later acquired by Emerson Artesyn / Abaco Systems
Model Code: 01-W3324F (Internal drawing part number: 84-W8324F01B, OEM mass production part number for VME main controller)
Series Position: Mid-to-high performance PowerPC VME host SBC, used as LCN rack main operator station / process controller for Honeywell TDC3000 distributed control system
Type: Single-height 6U VME64 master CPU board, independent PowerPC G4 processor, dual PMC expansion slots, multi-port Ethernet + multi-channel serial front-panel I/O, full VME master/slave function
Core Function: Real-time process control calculation, LCN network communication, field serial instrument data acquisition, analog/digital I/O scheduling via IndustryPack daughter boards; support redundant system configuration, VxWorks real-time OS, large-capacity local storage buffering
1. Product Overview
01-W3324F is Motorola’s OEM standardized VME main CPU board, corresponding to the commercial MVME5xxx PowerPC series platform, specially customized for Honeywell industrial DCS control cabinets. Unlike MVME705/MVME715 serial/digital I/O slave boards, it is a complete independent main controller with on-board CPU, memory, network and storage resources, capable of running control logic independently without relying on other host boards.
Equipped with PowerPC G4 high-frequency processor, ECC error-correcting SDRAM, on-board Flash firmware storage, four independent 10/100 Ethernet ports on front panel for redundant DCS network communication, one RS232 debug serial port, one wide SCSI storage interface, and dual PMC mezzanine expansion slots to support additional serial, analog I/O, graphics or communication modules.
The board fully complies with VME64 Rev C.1 bus standard, supports full A32/D64 block DMA transmission, built-in VME system arbiter, multi-level hardware watchdog, power-on self-test POST and comprehensive channel fault diagnosis circuits. The industrial-grade reinforced hardware design adopts multi-stage power filtering and wide-temperature components, adapting to long-term continuous operation in petrochemical, thermal power and offshore high-noise control cabinet environments.
Mainly deployed as the core host board of Honeywell TDC3000 LCN racks, responsible for operator station display data processing, process loop control algorithm operation, and data interaction with field I/O boards such as MVME705B, MVME715P, MVME333-2.
2. Complete Technical Specifications
• Processor: PowerPC G4 series embedded processor, independent L1/L2 cache, integrated AltiVec floating-point arithmetic unit
• System Memory: Onboard ECC SDRAM, expandable up to 1GB maximum, error correction for industrial data anti-corruption
• Firmware Storage: Surface-mount flash memory for boot monitor and VxWorks BSP firmware, optional on-board compact flash socket
• Network Interfaces: 4× independent 10/100BASE-TX Fast Ethernet RJ45 front-panel ports, magnetic isolation per channel, redundant network support
• Serial Port: 1× RS232 asynchronous debug console port, configurable baud rate 50~115200bps
• Storage Interface: Wide SCSI-2 connector for external hard disk / tape storage, DMA high-speed data reading and writing
• Expansion Buses: Dual IEEE P1386.1 32/64-bit PMC mezzanine slots, compatible with PMC serial, I/O, graphics and communication daughter boards
• VME Bus Function: Full VME64 master/slave, A16/A24/A32 addressing, D08/D16/D32/D64 BLT/SCT block transfer, built-in VME system controller and interrupt arbiter IRQ1~IRQ7
• Hardware Protection: Multi-stage LC power filter, ±15kV ESD all I/O ports, reverse polarity protection, multi-level watchdog timer, over-temperature automatic protection
• Front Panel I/O: Four RJ45 Ethernet ports, DB9 serial debug port, SCSI connector, RUN/FAULT/LAN multi-color LED indicators, manual global RESET & ABORT pushbuttons
• Operating Temperature: Standard industrial grade 0℃ ~ +55℃ forced air cooling; storage -40℃ ~ +85℃
• Humidity: 5% ~ 95% RH non-condensing, CE/UL industrial safety certification
• Mechanical Form Factor: Single-height 6U VME Eurocard, 233.4mm(H) × 160mm(W) × 20mm(D), single chassis slot occupancy
• Compatible Peripheral Daughter Boards: MVME705B serial transition module, MVME715P digital I/O module, MVME333-2 intelligent serial controller; Supported RTOS: VxWorks 5.x / 6.x
3. Core Industrial & DCS Application Scenarios
• Honeywell TDC3000 DCS LCN rack main host board: operator station data processing, real-time process control algorithm execution, redundant network communication management
• Thermal power plant boiler & turbine VME control cabinet core computing node, matched with multi-channel serial/digital I/O daughter boards for field signal acquisition and output
• Large petrochemical refining distributed control system main controller, multi-loop complex interlock control and historical data centralized logging
• Offshore oil & gas platform process monitoring VME main CPU, wide-temperature industrial environment stable operation support
• Aerospace ATE automated test bench main embedded computing host, multi-protocol instrument serial communication and high-speed data recording
Motorola / Emerson © 01-W3324F VME64 PowerPC Single Board Computer
Tags: Motorola 01-W3324F 6U Single-Slot VME Single Board Computer